No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

TP48200A-HX09A3, TP48200A-HX09A4, TBC300A-DCA3, TBC300A-DCA5, TBC300A-TCA2 Outdoor Power System User Manual

This document describes the DC power systems in terms of their features, configurations, components, and maintenance methods.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Smoke Alarm

Smoke Alarm

NOTE:
This alarm is generated only for the power system that has a smoke sensor installed.

Possible Causes

  • There is smoke inside the cabinet.
  • The smoke sensor is faulty.

Measures

  1. Check whether there is smoke inside the cabinet. If so, disconnect the power supply from the cabinet, handle the fault, and then restart the system and clear the alarm on the SMU.
  2. Check whether the smoke sensor is faulty. If the smoke sensor is faulty, replace it.
Download
Updated: 2019-03-05

Document ID: EDOC1000036238

Views: 5438

Downloads: 212

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next