No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

TP48200A-HX09A3, TP48200A-HX09A4, TBC300A-DCA3, TBC300A-DCA5, TBC300A-TCA2 Outdoor Power System User Manual

This document describes the DC power systems in terms of their features, configurations, components, and maintenance methods.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Load Loop Break

Load Loop Break

Possible Causes

  • The load circuit breaker has tripped or the load fuse has blown.
  • The load circuit breaker or the fuse detection cable is disconnected.

Measures

  1. Check whether the load circuit breaker has tripped or the load fuse has blown. If so, locate and rectify the circuit fault, and then switch on the circuit breaker or replace the fuse.
  2. Check whether the load circuit breaker or fuse detection cable is disconnected. If so, reconnect it.
Download
Updated: 2019-03-05

Document ID: EDOC1000036238

Views: 5530

Downloads: 218

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next