No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CX910 Switch Module V100R001C10 User Guide 15

This document describes the CX910 10GE switch module (CX910 for short) of the Tecal E9000 server in terms of its features, installation, removal, and configuration. This document applies to the CX910 whose 10GE switching planes use the software versions of, 2.00 and later.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logical Architecture

Logical Architecture

This topic describes the logical structure of the CX910.

The CX910 logical architecture contains three modules: CPU, 10GE switch module, and baseboard management controller (BMC) device management module.

The CPU system module is the controlling core for the CX910. It processes network protocol packets and manages user configurations.

The 10GE switch module forwards large-capacity service packets. The BMC management module manages the 10GE switch module to manage and monitor all switch module hardware in a centralized manner.

Figure 2-7 Logical architecture
Updated: 2018-09-20

Document ID: EDOC1000036339

Views: 11749

Downloads: 238

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next