No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX912 Switch Module V100R001C10 User Guide 17

This document describes the CX912 multi-plane switch module (CX912 for short) of the Tecal E9000 server in terms of its features, installation, removal, and configuration. This document applies to the CX912 whose 10GE switching planes use the software versions of 1.2.1.0.39, 2.00 and later.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Indicators

Indicators

This topic describes the names, meanings, colors, descriptions and working status of the indicators on the CX912.

By observing the indicators, you can determine the current operating status of the CX912.

Table 2-7 Indicators

Label

Meaning

Color

Description

STAT

Stacking status indicator

Green

  • Off: The CX912 is not powered on.
  • Blinking green for only 10 times: The CX912 is being powered on.
  • Blinking green: The CX912 is in standby or slave state in a stack and is operating properly.
  • Steady green: The CX912 is in the active state in a stack or is not stacked, and is operating properly.

HLY

Health indicator

Red and green

  • Off: The CX912 is not powered on.
  • Steady green: The CX912 is operating properly or has minor alarms.
  • Blinking red (1 Hz): A major alarm is generated.
  • Blinking red (4 Hz): A critical alarm is generated.
  • Blinking red (5 Hz): The CX912 is not securely installed.
NOTE:

It is difficult to identify the difference between blinking frequencies of 4 Hz and 5 Hz. If the indicator is blinking red quickly, check whether the device has been installed properly and then check whether a critical alarm has been generated.

OFL

Offline button/indicator (reserved)

N/A

N/A

and

Connection status indicator for the 10GE optical port

Green

  • Off: The port is not properly connected.
  • Steady green: The port is properly connected.

and

Data transmission status indicator for the 10GE optical port

Orange

  • Off: No data is being transmitted over the port.
  • Blinking orange: Data is being sent or received over the port.

A

Diagnosis status indicator for the 8G FC optical port

Orange

  • Off: No optical module is installed, or an exception occurs when the port is receiving optical signals. (The L indicator is also off.)
  • Steady orange: The port is not synchronized, and a connection exception occurs.
  • Blinking orange (once/2 seconds): The port is disabled.
  • Blinking orange (twice/second): The port is faulty.

L

Connection status indicator for the 8G FC optical port

Green

  • Off: No optical module is installed, or an exception occurs when the port is receiving optical signals. (The A indicator is also off.)
  • Steady green: The port is normal, and the link is connected.
  • Blinking green (blinking every two seconds): The port is normal but isolated. No link is set up.
  • Blinking green (blinking twice per second): The port is in the diagnosis state.
  • Blinking green (blinking four times per second): The link is properly set up and the port is transmitting data.
Translation
Download
Updated: 2018-09-20

Document ID: EDOC1000036343

Views: 38049

Downloads: 1951

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next