No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX912 Switch Module V100R001C10 User Guide 17

This document describes the CX912 multi-plane switch module (CX912 for short) of the Tecal E9000 server in terms of its features, installation, removal, and configuration. This document applies to the CX912 whose 10GE switching planes use the software versions of 1.2.1.0.39, 2.00 and later.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Overview

Configuration Overview

Configuration Process

Figure 4-1 Switch module configuration process

The 10GE switching plane and FC switching plane of the CX912 must be configured respectively.

The FC switching plane refers to the MX210 in the CX912. This document describes the features and common configurations of the FC switching plane.

Related Documents

Related documents of the 10GE switching plane in the CX912 are as follows:

Related documents of the FC switching plane in the CX912 are as follows:

NOTE:

The FC switching plane software is Brocade Fabric OS, which is independently developed by Brocade.

Translation
Download
Updated: 2018-09-20

Document ID: EDOC1000036343

Views: 35102

Downloads: 1941

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next