No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CX912 Switch Module V100R001C10 User Guide 17

This document describes the CX912 multi-plane switch module (CX912 for short) of the Tecal E9000 server in terms of its features, installation, removal, and configuration. This document applies to the CX912 whose 10GE switching planes use the software versions of, 2.00 and later.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logical Architecture

Logical Architecture

This topic describes the CX912 logical architecture.

The CX912 logical architecture contains four modules: CPU, 10GE switch module, MX210 mezzanine switch module, and baseboard management controller (BMC) device management module.

The CPU system module is the controlling core for the CX912. It processes network protocol packets and manages user configurations.

The 10GE switch module forwards large-capacity service packets. The MX210 mezzanine switch module exchanges data between compute nodes, storage nodes, and the storage services on management modules and provides external ports for the storage switching plane. The BMC device management module manages and monitors all switch module hardware in a centralized manner.

Figure 2-7 Logical architecture
Updated: 2018-09-20

Document ID: EDOC1000036343

Views: 34633

Downloads: 1941

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next