No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CX912 Switch Module V100R001C10 User Guide 17

This document describes the CX912 multi-plane switch module (CX912 for short) of the Tecal E9000 server in terms of its features, installation, removal, and configuration. This document applies to the CX912 whose 10GE switching planes use the software versions of, 2.00 and later.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Disabling SNMP

Disabling SNMP

Disable SNMPv1/2c of MX210 on the command-line interface (CLI).


You have logged in to the CLI of the FC switching plane.


  1. Log in to the MX210 using the default management account.
  2. Run the snmpConfig disable command on the CLI to disable SNMPv1/2c.

    switch:admin>snmpconfig --disable snmpv1 
    switch:admin>snmpconfig --show 
    SNMPv1 community and trap recipient configuration: 
    Community 1: ram (rw) 
    Trap recipient: 
    Trap port: 162 
    Trap recipient Severity level: 5 
    Community 2: OrigEquipMfr (rw) 
    No trap recipient configured yet 
    Community 3: private (rw) 
    No trap recipient configured yet 
    Community 4: public (ro) 
    No trap recipient configured yet 

Updated: 2018-09-20

Document ID: EDOC1000036343

Views: 34719

Downloads: 1941

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next