No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX912 Switch Module V100R001C10 User Guide 17

This document describes the CX912 multi-plane switch module (CX912 for short) of the Tecal E9000 server in terms of its features, installation, removal, and configuration. This document applies to the CX912 whose 10GE switching planes use the software versions of 1.2.1.0.39, 2.00 and later.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Internal Chassis Networking

Internal Chassis Networking

This topic describes connection relationships between the CX912 and mezz modules on compute nodes.

For details, see E9000 Blade Server Mezz Module-Switch Module Interface Mapping Tool.

Figure 2-8 shows the internal chassis networking for the CX912 and compute nodes. Ports on compute nodes for connecting to the CX912 are provided by two mezz modules. The mapping between the CX912 and the NIC and mezz modules is described as follows:

  • Mezz 1 connects to the 10GE switching planes and FC switching planes of the CX912s in slots 2X and 3X.
  • Mezz 2 connects to the 10GE switching planes and FC switching planes of the CX912s in slots 1E and 4E.
Figure 2-8 Mapping between the CX912 and mezz modules on compute nodes

Mapping between the CX912 and ports on the MZ912

The two 10GE ports (ports 1 and 2) on the MZ912 map to the 10GE switching planes of the CX912s in slots 3X and 2X respectively.

The8G FC ports (ports 3 and 4) on the MZ912 map to the FC switching planes of the CX912s in slots 3X and 2X respectively.

Figure 2-9 Mapping between the CX912 and ports on the MZ912
Translation
Download
Updated: 2018-09-20

Document ID: EDOC1000036343

Views: 34480

Downloads: 1941

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next