No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX913 Switch Module V100R001C10 User Guide 15

This document describes the CX913 10GE switch module (CX913 for short) of the Tecal E9000 server in terms of its features, installation, removal, and configuration. This document applies to the CX913 whose 10GE switching planes use the software versions of 1.2.1.0.39, 2.00 and later.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Information

Default Information

Table 1 Default information describes the default information of CX913.

Table 4-2 Default information

User Name

User Description

Default Password

User Type

User Status

Login Method

root

A BMC user

Huawei12#$

Administrative user

Enabled

Remote or local login

A user that logs in to the basic input/output (BIOS) Setup menu.

The user has no user name.

Huawei12#$

NOTE:
  • During system boot, you can press F5 to select your keyboard layout (French keyboard, U.S. English keyboard, or UK English keyboard).
  • The default BIOS password is Huawei12#$ for the U.S. English or French keyboard and is Huawei12£$ for the UK English keyboard.

Administrative user

Enabled

Local login

root

A user that logs in to the 10GE switching plane.

The user has no user name if over a serial port.

Huawei12#$

Administrative user

Enabled

Remote or local login

NOTE:

Switch modules have a virtual serial port COM1. The virtual serial port is used by the built-in software system in a switch module to manage the switch module. Note the following about the virtual serial port:

  • Users cannot log in to the virtual serial port.
  • The default password is Huawei#123.
  • Do not set or change the virtual serial port login password; otherwise, some switch module functions fail.
  • If the login password is changed, run the undo authentication-mode or undo set authentication password command to delete the new login password.
Translation
Download
Updated: 2018-09-20

Document ID: EDOC1000036345

Views: 13422

Downloads: 183

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next