No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CX913 Switch Module V100R001C10 User Guide 15

This document describes the CX913 10GE switch module (CX913 for short) of the Tecal E9000 server in terms of its features, installation, removal, and configuration. This document applies to the CX913 whose 10GE switching planes use the software versions of, 2.00 and later.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Using the MM910 WebUI to Collect 10GE switching plane Information

Using the MM910 WebUI to Collect 10GE switching plane Information

This topic describes how to use the MM910 WebUI (MM910 software version: 6.00 or later) to collect logs of the 10GE switching plane (switching plane software version: 5.30 or later).


To use the one-click full collection function of the MM910 to collect 10GE switching plane logs, the following two conditions must be met:

  • The MM910 software version is 6.00 or later.
  • The 10GE switching plane software version is 5.30 or later.


  1. Log in to the MM910 WebUI.

    For details, see Logging In to the HMM WebUI.

  2. Choose System Management > Information Collection and set the information collection parameters.

    • Collected from: Select MM.
    • Collected content: Select One-click full collection.

  3. Click Start Collection to start collecting logs. See Figure 6-11.

    Figure 6-11 Information collection

  4. In the displayed dialog box, click Save and save the log file to the local PC.
  5. Decompress the one_touch_info_all.tar.gz file. The collected logs of the 10GE switching plane are in the swin_fru2 folder.


    n is the switch module or passthrough module slot number and ranges from 1 to 4.

Updated: 2018-09-20

Document ID: EDOC1000036345

Views: 15157

Downloads: 185

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next