No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CX913 Switch Module V100R001C10 User Guide 15

This document describes the CX913 10GE switch module (CX913 for short) of the Tecal E9000 server in terms of its features, installation, removal, and configuration. This document applies to the CX913 whose 10GE switching planes use the software versions of, 2.00 and later.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Switching Service Data

Configuring Switching Service Data


Configure the CX913 10GE switching plane feature data after the CX913 meets the basic configuration conditions.


  1. Configure the features of the 10GE switching plane in the CX913.

    The following describes the feature configurations of the 10GE switching plane. For details, see CX11x&CX31x&CX710&CX91x Series Switch Modules V100R001C10 Configuration Guide.
    • Interface Management
      • Basic Configuration for Interfaces
      • Ethernet Interfaces Configuration
      • Logical Interface Configuration
    • Ethernet Switching
      • MAC Address Table Configuration
      • Link Aggregation Configuration
      • VLAN Configuration
      • QinQ Configuration
      • VLAN Mapping Configuration
      • STP/RSTP Configuration
      • MSTP Configuration
      • Loopback Detection Configuration
      • Layer 2 Protocol Transparent Transmission Configuration
    • IP Service
      • IP Address Configuration
      • ARP Configuration
      • DHCP Configuration
      • DNS Configuration
      • UDP Helper Configuration
      • IP Performance Configuration
      • Basic IPv6 Configurations
      • DHCPv6 Configuration
      • IPv6 Transition Technology Configuration
    • IP Routing
      • Static Route Configuration
      • RIP Configuration
      • RIPng Configuration
      • OSPF Configuration
      • OSPFv3 Configuration
      • IPv4 IS-IS Configuration
      • IPv6 IS-IS Configuration
      • BGP Configuration
      • Routing Policy Configuration
      • Managing IP Routing Tables
      • PBR Configuration
    • IP Multicast
      • IGMP Configuration
      • MLD Configuration
      • PIM (IPv4) Configuration
      • PIM (IPv6) Configuration
      • MSDP Configuration
      • Multicast Route Management (IPv4) Configuration
      • Multicast Route Management (IPv6) Configuration
      • IGMP Snooping Configuration
      • Static Multicast MAC Address Configuration
      • Multicast VLAN Replication Configuration
      • Multicast Network Management
    • QoS
      • MQC Configuration
      • Priority Mapping Configuration
      • Traffic Policing and Traffic Shaping Configurations
      • Congestion Avoidance and Congestion Management Configuration
      • Packet Filtering Configuration
      • Redirection Configuration
    • Security
      • AAA Configuration
      • ACL Configuration
      • Local Attack Defense Configuration
      • MFF Configuration
      • Traffic Suppression and Storm Control Configuration
      • ARP Security Configuration
      • DHCP Snooping Configuration
      • IPSG Configuration
      • URPF Configuration
      • Keychain Configuration
      • Checking Security Risks
    • Reliability
      • BFD Configuration
      • VRRP Configuration
      • DLDP Configuration
      • Smart Link and Monitor Link Configuration
      • Smart Channel Configuration
      • EFM Configuration
    • Device Management
      • Displaying the Device Status
      • Hardware Management
      • Information Center Configuration
      • NTP Configuration
      • Fault Management Configuration
      • Energy-Saving Management
      • Performance Management Configuration
      • Maintenance Assistant Configuration
      • OPS Configuration
    • Network Management
      • SNMP Configuration
      • RMON Configuration
      • NETCONF Configuration
      • LLDP Configuration
      • NQA Configuration
      • Mirroring Configuration
      • Packet Capture Configuration
      • NetStream Configuration
      • sFlow Configuration
    • FCoE&DCB
      • FCoE Configuration
      • DCB Configuration
    • TRILL
    • Virtual Perception

Updated: 2018-09-20

Document ID: EDOC1000036345

Views: 15153

Downloads: 185

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next