No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CX913 Switch Module V100R001C10 User Guide 15

This document describes the CX913 10GE switch module (CX913 for short) of the Tecal E9000 server in terms of its features, installation, removal, and configuration. This document applies to the CX913 whose 10GE switching planes use the software versions of, 2.00 and later.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Overview

Configuration Overview

Configuration Process

After hardware installation of the CX913, configure the installed CX913 to implement the switching function.

Figure 4-1 Switch module configuration process
Table 4-1 Configuration process description



Set an IP address for the management network port.

Set the IP address for the management network port of the 10GE switching plane.

You can log in to the CLI of the switching plane from a PC by using the IP address of the management network port.

Log in to the CLI of each switching plane.

You can log in to the 10GE switching plane CLI over Secure Shell (SSH), Serial Over LAN (SOL), or a serial port.

Check the switching plane.

Check the following items in the 10GE switching plane of the CX913:

  • Query versions and check whether the versions are the required ones.
  • Query alarms and check whether an alarm is generated.

Changing the Initial User Passwords

Change the initial user passwords after the first login to the CX913 to ensure the security of system operating and maintenance.

This topic describes how to change the initial user passwords of the BMC, 10GE switching plane, and BIOS.

Add a user.

Add a user in the 10GE switching plane of the CX913. You can log in to the switching plane CLI for routine maintenance as the new user.

Configure the FC port mapping.

Customize the mapping between the 10GE switching plane FC ports and compute node slots.

Configure switch module data.

This topic describes the switching service data supported by the 10GE switching plane of the CX913.

Back up configuration files.

Back up the configuration file of the 10GE switching plane for the CX913. If configuration errors occur or the CX913 is faulty, you can use the backup configuration file to restore configuration data.

Related Documents

Related documents of the 10GE switching plane in the CX913 are as follows:

Updated: 2018-09-20

Document ID: EDOC1000036345

Views: 13485

Downloads: 183

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next