No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Hardware Installation and Maintenance Guide

CloudEngine 8800, 7800, 6800, and 5800

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Preparing Installation Tools and Accessories

Preparing Installation Tools and Accessories

Table 4-4 lists the tools required for installing the CloudEngine 8800, 7800, 6800, and 5800 series switches.

Table 4-4 Installation tools

Tool

Description

Picture

ESD gloves

Used to prevent electrostatic discharges.

Protective gloves

Used to protect hands against lacerations and abrasions.

ESD wrist strap

Used to prevent electrostatic charges. Wear the strap on your wrist and insert the other end into the ESD jack on the cabinet.

Utility knife

Used to cut open cartons.

Measuring tape

Used to measure distances.

Marker

Used to mark component installation positions and draw lines.

Flat-head screwdriver

Used to turn slotted-head screws and bolts.

Phillips screwdriver

Used to turn cross-head screws and bolts.

Diagonal pliers

Used to cut insulation tubes and cable ties.

Network cable tester

Used to test network cable connectivity.

Multimeter

Used to test cabinet insulation, cable connectivity, and device electrical performance indicators including voltage, current, and resistance.

Table 4-5 lists the installation accessories required for installing the CloudEngine 8800, 7800, 6800, and 5800 series switches.

Table 4-5 Installation accessories

Accessory

Description

Picture

Cable tie

Used to bundle cables.

Fiber binding tape

Used to bundle optical fibers.

Insulation tape

Used to insulate power wires or other conductors.

Corrugated tube

Used to protect optical fibers.

Translation
Download
Updated: 2019-10-14

Document ID: EDOC1000036822

Views: 46681

Downloads: 3375

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next