No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Hardware Installation and Maintenance Guide

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600

This section provides brief procedure for installing the AR series routers. This document describes preparations before AR series routers installation, installation methods and precautions, AR series routers maintenance, and common methods for troubleshooting typical hardware module faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Scenario 2: Installing a Router on a Desk (AR1200 Series)

Scenario 2: Installing a Router on a Desk (AR1200 Series)


  • Ensure that the desk is flat and properly grounded.
  • Leave at least 50 mm of clearance around the router for heat dissipation.
  • Do not place other objects on the router.

Tools and Accessories

  • Rubber pads (four)


  1. Attach four rubber pads in the imprinted round areas marked plus (+) signs at the bottom of the router.

  2. Gently place the router on the desk.

Updated: 2019-05-17

Document ID: EDOC1000039117

Views: 78238

Downloads: 6782

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next