No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Hardware Installation and Maintenance Guide

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600

This section provides brief procedure for installing the AR series routers. This document describes preparations before AR series routers installation, installation methods and precautions, AR series routers maintenance, and common methods for troubleshooting typical hardware module faults.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Connecting the Console Cable

Connecting the Console Cable

Context

  • Do not power on the router before you finish connecting cables.
  • Notice flags on interfaces when connecting cables. Incorrect cable connection may damage interface modules or the router.

Tools and Accessories

  • Console cable
NOTE:

The console cable is not included in the installation accessory package and needs to be purchased separately.

Procedure

  1. Connect the console cable.
    1. Connect the RJ45 connector of the console cable to the CON/AUX interface (RJ45) of the router.
    2. Connect the DB9 connector of the console cable to the serial interface (COM) of a management PC.



Follow-up Procedure

After connecting the console cable, configure the serial port communication software on the management PC, so that you can log in to the command line interface (CLI) of the router. The following describes how to set the serial port communication software on the Windows XP and Windows 7 operating systems.

  • Windows XP

    1. Start HyperTerminal provided by the Windows system or a third-party serial port communication program on the management PC.
    2. Create a connection, select a serial port, and configure the following parameter settings:
      • Bits per second: 9600
      • Data bits: 8
      • Parity: None
      • Stop bit: 1
      • Flow control: None
    3. Click OK. The router copyright statement is displayed on the HyperTerminal. Enter the default user account and password as prompted to log in to the CLI of the router.

      NOTE:

      For V300R019C00 and later versions, the default user name is admin and the default password is admin@huawei.com.

      For the other versions, the default user name is admin and the default password is Admin@huawei.

  • Windows 7

    The Windows 7 operating system does not provide the HyperTerminal. You can download free HyperTerminal software, such as PuTTY, from the Internet. The following example describes how to use the PuTTY software.
    1. Download the PuTTY software to the PC and double-click it to run the software.
    2. Select Session and set Connection type to Serial.
    3. Set serial port parameters.

    4. Click Open. The router copyright statement is displayed. Enter the default user account and password as prompted to log in to the CLI of the router.

      NOTE:

      For V300R019C00 and later versions, the default user name is admin and the default password is admin@huawei.com.

      For the other versions, the default user name is admin and the default password is Admin@huawei.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000039117

Views: 63798

Downloads: 6438

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next