No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Hardware Installation and Maintenance Guide

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600

This section provides brief procedure for installing the AR series routers. This document describes preparations before AR series routers installation, installation methods and precautions, AR series routers maintenance, and common methods for troubleshooting typical hardware module faults.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Installing a Hard Disk

(Optional) Installing a Hard Disk

Context

Only the AR2204XE can have a hard disk installed.

NOTE:

The procedures and methods for installing hard disks in different routers are the same. An AR169W-P-M9 router is used as an example here.

Tools and Accessories

  • Hard disk
  • Hard disk holder
  • M3 screws
  • Phillips screwdriver
NOTE:

The hard disk is not included in the installation accessory package and needs to be purchased separately.

Procedure

  1. Hold down the release button on the left side of the filler panel and pull out the filler panel.



  2. Take out the hard disk holder from the accessory package, and use a Phillips screwdriver to fix the hard disk in the holder with M3 screws.

    NOTE:

    The tightening torque for the M3 screws should be 3.5±0.5 kgf•cm. Excessive tightening torque will distort or damage the hard disk holder.



  3. Open the locking latch of the hard disk holder and insert the hard disk into the router.



  4. Close the locking latch to lock the hard disk in the router.



Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000039117

Views: 63061

Downloads: 6418

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next