No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Hardware Installation and Maintenance Guide

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600

This section provides brief procedure for installing the AR series routers. This document describes preparations before AR series routers installation, installation methods and precautions, AR series routers maintenance, and common methods for troubleshooting typical hardware module faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Installing a PoE Power Supply

(Optional) Installing a PoE Power Supply


If an AR151W-P, AR201VW-P, AR207V-P, AR161FW-P-M5, AR169-P-M9, AR169W-P-M9 or AR169RW-P-M9 router needs to supply power to powered devices (PDs) such as IP phones, WLAN APs, and IP cameras, as shown in Figure 3-1, connect a PoE power supply to the router.
Figure 3-1  PoE power supply

  • LAN interfaces FE0 to FE3 of the AR151W-P router support PoE power supply.
  • LAN interfaces FE0 to FE6 of the AR201VW-P and AR207V-P routers support PoE power supply.
  • LAN interfaces GE0 to GE3 of the AR161FW-P-M5, AR169-P-M9, AR169W-P-M9, and AR169RW-P-M9 routers support PoE power supply.
  • The methods for connecting a PoE power supply to different AR routers are the same. An AR151W-P router is used as an example here.

Tools and Accessories

  • PoE power supply

The PoE power supply is not included in the installation accessory package and needs to be purchased separately.


  1. Connect one end of the PoE power supply to the PoE power jack of the router and the other end to an AC power outlet.

Updated: 2019-05-17

Document ID: EDOC1000039117

Views: 78054

Downloads: 6772

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next