No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Hardware Installation and Maintenance Guide

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600

This section provides brief procedure for installing the AR series routers. This document describes preparations before AR series routers installation, installation methods and precautions, AR series routers maintenance, and common methods for troubleshooting typical hardware module faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Connecting the AC Power Cable

Connecting the AC Power Cable

Context

To avoid electric shock, do not connect power cables while the power is on.

  • Do not power on a router before you finish connecting power cables and network cables.
  • Each router has its own power cables delivered as accessories. The power cables can only be used on the router in the same package and cannot be used on any other device.
NOTE:

The AC power cable parameters vary in different countries or regions. The figures in this section are for reference only and may differ from the cables delivered.

Tools and Accessories

  • ESD wrist strap
  • AC Power Cable
  • AC terminal locking latch

Procedure

  1. Verify that the router is reliably grounded.
  2. Set the power switch to OFF.
  3. Wear an ESD wrist strap. Ensure that the ESD wrist strap is grounded and in a close contact with your wrist.
  4. Connect the AC power cable.
    1. Connect one end of the AC power cable to the power socket on the router.
    2. Connect the other end of the AC power cable to an AC power outlet.



  5. Connect the AC terminal locking latch.
    1. Insert the AC terminal locking latch into the jack on the rear panel of the router.
    2. Adjust the AC terminal locking latch to a proper position.
    3. Lock the AC power cable with the AC terminal locking latch.



Follow-up Procedure

Perform the following operations after connecting the AC power cable:

  • Verify that the AC power cable is securely connected to the power socket on the router.
  • If multiple routers are installed, attach labels to both ends of each power cable and write numbers on the labels to identify them.
Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000039117

Views: 77524

Downloads: 6751

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next