No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

RH5885H V3 Server LCD V100R003 User Guide 04

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Viewing Server Information

Viewing Server Information

Procedure

Enter the Info. tab.

  1. On the liquid crystal display (LCD), tap the Info. tab.

    The Info. tab is displayed, as shown in Figure 6-1.

    Figure 6-1 Info. tab

    Mgmt Port

    Displays the IP information of the iMana 200 or iBMC management network port.

    Basic Info

    Displays the MAC addresses of host network ports, device serial numbers, and asset information.

    Version

    Displays the firmware version.

View the IP address of the management network port.

  1. Tap the Mgmt Port tab.

    The Mgmt Port tab is displayed, as shown in Figure 6-1.

  2. View the IP address of the management network port.

    The Mgmt Port tab displays the mode, VLAN ID, MAC address, IPv4 address, and IPv6 address of the management network port.

View basic information

  1. Tap the Basic Info tab.

    The Basic Info tab is displayed, as shown in Figure 6-2.

    Figure 6-2 Basic Info tab

  2. View the MAC addresses of host network ports, device serial numbers, and asset information.

View the firmware version.

  1. Tap the Version tab.

    The Version tab is displayed.

    Figure 6-3 shows the iMana 200 management system.

    Figure 6-3 Version

    Figure 6-4 shows the iBMC management system.

    Figure 6-4 Version

  2. View the firmware version.

    The Version tab displays the following firmware:
    • Active iMana: indicates the iMana 200.
    • Active iBMC: indicates the iBMC.
    • BIOS: indicates the Basic Input/Output System (BIOS).
    • CPLD: indicates the Complex Programmable Logical Device (CPLD).
    • HDD BP CPLD: indicates the CPLD on the hard disk backplane.
    • RAID CARD: indicates the Redundant Array of Independent Disks (RAID) controller card.
    • NIC CARD: indicates the network interface card (NIC).
    • LCD: indicates the LCD.

Translation
Download
Updated: 2018-11-23

Document ID: EDOC1000039568

Views: 5786

Downloads: 316

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next