No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


RH5885H V3 Server LCD V100R003 User Guide 04

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Opening the LCD

Opening the LCD


  1. Locate the LCD installation position on the lower left corner of the front server panel.
  2. Press the spring on the LCD. See step (1) in Figure 2-1.

    Figure 2-1 Opening an LCD

  3. Pull the LCD out of the server completely (until the spindle appears). See step (2) in Figure 2-1.
  4. Rotate the LCD into a position for better viewing. See step (3) in Figure 2-1.
  5. Tap any place on the LCD screen using your fingernail or a touch pen.

    The LCD is activated, and a login screen shown in Figure 2-2 is displayed.

    Figure 2-2 LCD login screen

  6. Enter the iMana 200 or iBMC user name and password, and tap Log In.

    • The soft keyboard is displayed when you tap the text box. Enter the user name in the first text box and the password in the second text box.
    • You can tap Cancel to clear the settings.

    The Status tab is displayed, as shown in Figure 2-3.

    Figure 2-3 Status tab

Updated: 2018-11-23

Document ID: EDOC1000039568

Views: 6086

Downloads: 318

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next