No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

RH5885H V3 Server LCD V100R003 User Guide 04

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Functions

Functions

Function

A liquid crystal display (LCD) displays the installation status and running status of server components and enables users to set the IP address of the iMana 200 or iBMC management network port on the server.

NOTE:

The server management system can be iMana 200 or iBMC. The actual management system can be determined by checking the management software WebUI.

The LCD and the server iMana 200 or iBMC management module (iMana 200 or iBMC for short) form an LCD subsystem. It directly obtains device information from iMana 200 or iBMC. The LCD subsystem does not store device data.

Figure 1-1 shows the working principle of the LCD subsystem.

Figure 1-1 Working principle

The LCD runs on the iMana 200 or iBMC. It is used to query the device status and alarms.

Installation Position

The LCD is installed on the lower left side of the front server panel, as shown in Figure 1-2.

Figure 1-2 Installation instruction

LCD Screen

Figure 1-3 shows the LCD screen.

Figure 1-3 LCD screen

Table 1-1 describes the functions of each tab on the LCD screen.

Table 1-1 Tab function

Tab

Function

Status tab

Displays the status of port 80, serial number, component status, and component alarms of the server.

Monitor tab

Displays the current power of the server, component temperature, and Peripheral Component Interconnect Express (PCIe) card temperature rises.

Info. tab

Displays the IP address and Media Access Control (MAC) address of the iMana 200 or iBMC management network port, MAC addresses of host network ports, device serial numbers, asset information, and firmware version.

Setting tab

Sets the IP address of the iMana 200 or iBMC management network port.

Icon Description

Table 1-2 describes the LCD subsystem icons and their meanings.

Table 1-2 Icon meaning

Icon

Description

Indicates that the server is operating properly and that no alarm is generated.

Indicates that a minor alarm is generated.

A minor alarm is generated for a fault that does not have major impact on the system. The minor alarm requires prompt corrective measures to prevent more serious faults.

Indicates that a major alarm is generated.

A major alarm is generated for the fault that may affect normal running of the system or interrupt services.

Indicates that a critical alarm is generated.

A critical alarm indicates the fault that may power off a device, and even interrupt the system services. Therefore, immediate corrective measures for critical alarms are required.

Indicates that the component cannot be scanned.

Indicates that the component is working properly.

Indicates that a minor alarm is generated on the component.

Indicates that a major alarm is generated on the component.

Indicates that a critical alarm is generated on the component.

Indicates that the component is not installed.

Page down

Back

Page up

Indicates the delete key on the soft keyboard.

Translation
Download
Updated: 2018-11-23

Document ID: EDOC1000039568

Views: 5807

Downloads: 316

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next