No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

RH5885H V3 Server LCD V100R003 User Guide 04

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the IP Address for the Management Network Port

Setting the IP Address for the Management Network Port

You must set the IP address for the management network port on the server.

This IP address can be a dynamic or static IP address.

  • The dynamic IP address is controlled by the Dynamic Host Configuration Protocol (DHCP). After the DHCP function is enabled, the IP address of the management network port is obtained automatically.
  • The static IP address is set manually.

Impact on the System:

  • Changing the IP address will result in the disconnection of Web and CLP from the iMana 200 or iBMC.
  • This operation does not affect services running on the server.

Table 7-1 lists the data to obtained before this operation.

Table 7-1 Required data

Category

Parameter

Description

Value Example

IP address Information of the management network port

Mode

Indicates the mode of the management network port.

Value: Dedivated, Shared, and Adaptive

Setting method: Tap the button.

Dedivated

VLAN ID

Indicates the VLAN ID of the management network port.

Value: 1 to 4094.

Tap to open the vlan function, and input the VLAN ID using the soft keyboard.

-

IPv4

DHCP

Indicates whether the DHCP function is enabled.

NOTE:

You can set the static IP address of the management network port only after the DHCP function is disabled.

Value: ON and OFF

  • means DHCP function is enabled.
  • means DHCP function is disabled.

Setting method:

  • Tap to enable the DHCP function.
  • Tap to disable the DHCP function.

OFF

IP Addr

Indicates the static IPv4 address of the management network port.

Value: The IPv4 address is expressed in decimal format. The maximum length is 32 digits.

Value rule:

  • The value is divided into four sets. Each set has three decimal numbers.
  • Each set is separated by period (.).
  • The value ranges from 0 to 255.

Setting method: use the soft keyboard.

192.168.30.126

Subnet Mask

Indicates the subnet mask of the management network port.

Setting method: use the soft keyboard.

255.255.255.0

Default GateWay

Indicates the gateway address of the management network port.

Setting method: use the soft keyboard.

192.168.30.1

IPv6

DHCP

Indicates whether the DHCP function is enabled.

NOTE:

You can set the static IP address of the management network port only after the DHCP function is disabled.

Value: ON and OFF

  • means DHCP function is enabled.
  • means DHCP function is disabled.

Setting method:

  • Tap to enable the DHCP function.
  • Tap to disable the DHCP function.

OFF

IP Addr

Indicates the static IPv6 address of the management network port.

Value: The IPv6 address is expressed in hexadecimal format. The maximum length is 128 characters.

Value rule:

  • The value is divided into eight sets. Each set has four hexadecimal numbers.
  • Each set is separated by colon (:).
  • The value ranges from 0 to 9 and a to f.

Setting method: use the soft keyboard.

2001::1:174

Prefix Length

Indicates the type of IPv6 address.

The default value is 0, indicating the subnet in the Local Area Network (LAN).

Setting method: use the soft keyboard.

0

Default GateWay

Indicates the gateway address of the management network port.

Setting method: use the soft keyboard.

::

Procedure

Switch to the Setting screen.

  1. On the liquid crystal display (LCD), click the Setting tab.

    The Setting screen is displayed, as shown in Figure 7-1.

    Figure 7-1 Setting

Set the IP address.

  1. Click the Mgmt Port tab.

    The Mgmt Port screen is displayed, as shown in Figure 7-1.

  2. Set the IP address of the management network port based on the parameter information described in Table 7-1.

    NOTE:

    The soft keyboard is displayed after you click the text box. You can use the soft keyboard to set the IP address or click Cancel to return to the Mgmt Port screen.

Translation
Download
Updated: 2018-11-23

Document ID: EDOC1000039568

Views: 6060

Downloads: 318

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next