No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei Server Brickland Platform BIOS Parameter Reference 23

This document describes the basic input/output system (BIOS) menu structure, parameters and common tasks based on the Brickland platform.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling Enhanced Machine Check Architecture (eMCA):Gen1

Enabling Enhanced Machine Check Architecture (eMCA):Gen1

This topic describes how to enable the Enhanced Machine Check Architecture(eMCA):Gen1 function.

Scenarios

Enable the Enhanced Machine Check Architecture(eMCA):Gen1 function using basic input/output system (BIOS) programs.

The Enhanced Machine Check Architecture(eMCA):Gen1 function indicates the first-generation enhanced Machine Check Architecture (MCA) and enables BIOS to process memory correctable errors first. After the function is enabled, the system translates the addresses of memory errors and locates the detailed error units. This improves system serviceability. This function is enabled by default.

Impact on the System

This operation has no adverse impact on the system.

Prerequisites

Conditions

You have accessed BIOS. For details, see 2.1 .

Data

Data preparation is not required for this operation.

Procedure

  1. Choose IntelRCSetup > Runtime Error Logging and press Enter.

    The Runtime Error Logging screen appears, as shown in Figure 3-21.

    Figure 3-21 Runtime Error Logging screen

  2. Select System Errors and press Enter, as shown in Figure 3-21.
  3. Choose Enable from the shortcut menu.
  4. Select EMCA Logging Support and press Enter, as shown in Figure 3-22.

    Figure 3-22 EMCA Logging Support

  5. Choose Enable from the shortcut menu to enable EMCA Logging Support.
  6. Enable EMCA CMCI-SMI Morphing using the same method of enabling EMCA Logging Support.
  7. Press F10.

    The Exit Saving changes? dialog box appears.

  8. Select Yes to save the settings.
Translation
Download
Updated: 2018-12-03

Document ID: EDOC1000039573

Views: 81305

Downloads: 933

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next