No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei Server Brickland Platform BIOS Parameter Reference 23

This document describes the basic input/output system (BIOS) menu structure, parameters and common tasks based on the Brickland platform.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the BIOS Password

Setting the BIOS Password

This topic describes how to set an administrator password for the basic input/output system (BIOS).

Scenarios

Set the BIOS password using the BIOS.

Impact on the System

This operation has no adverse impact on the system.

Prerequisites

Conditions

You have entered the BIOS. For details, see 2.1 .

Data

Data preparation is not required for this operation.

Procedure

  1. Select the Security tab.

    The Security screen is displayed, as shown in Figure 2-9.

    NOTE:

    Figure 2-9 shows the Security screen of the RH8100 V3 server. The Power On Password parameter is available on the Security screens of other servers.

    Figure 2-9 Security screen

  2. Select Administrator Password and press Enter. Set an administrator password.

    NOTE:
    • The administrator password must be a string of 8 to 16 characters, and must contain special characters (including spaces), uppercase letters, lowercase letters, and digits.
    • The default BIOS password is Huawei12#$ for the American keyboard, Huqzei&é34 for the French keyboard, and Huawei12£$ for the English keyboard.
    • When entering the BIOS password on the remote virtual console:
    • If the keyboard type configured in the OS is the same as the actual keyboard type, enter the password by using the actual keyboard.
    • If the keyboard type configured in the OS is different from the actual keyboard type, enter the password by using the keyboard configured in the OS.

  3. (Optional) After the setting, select Clear Administrator Password to clear the password.
  4. Press F10.

    The Save configuration and exit? dialog box appears.

  5. Select Yes and press Enter to save the setting.
Translation
Download
Updated: 2018-12-03

Document ID: EDOC1000039573

Views: 80450

Downloads: 931

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next