No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei Server Brickland Platform BIOS Parameter Reference 23

This document describes the basic input/output system (BIOS) menu structure, parameters and common tasks based on the Brickland platform.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Trusted Computing

Trusted Computing

This topic describes the method of setting whether to support security devices.

You can set whether to support security devices on the Trusted Computing screen. Table 5-6 describes the parameters on this screen.Figure 5-6 and Figure 5-7 show the screen.

Figure 5-6 Trusted Computing screen (Haswell)

Figure 5-7 Trusted Computing screen (Broadwell)

Table 5-6 Parameters on the Trusted Computing screen (Haswell)

Parameter

Description

Default Value

Security Device Support

Security device support switch. The options are as follows:

  • Enable: supports security devices.
  • Disable: does not support security devices.
NOTE:
  • After the value is changed from Disable to Enable, the operating system must be restarted, and the security devices can be seen and configured next time this screen is displayed. For example, if the value is changed from Disable to Enable during a TPM installation, the TPM cannot be seen immediately. Instead, you can see the TPM on the screen after the operating system is restarted.
  • If the value is changed from Disable to Enable, the TPM State and Pending Operation options are available.

Enable

Device Select

Security device type. The options are as follows:

  • Auto: TPM 1.2, TPM 2.0, and TCM security devices can be selected based on board configurations.
  • TPM1.2: Only the TPM 1.2 security device is supported.
  • TPM2.0: Only the TPM 2.0 security device is supported.

Auto

Install the TPM 1.2 security device. Table 5-7 describes the parameters.Figure 5-8 shows the TPM 1.2 configuration screen.

Figure 5-8 TPM 1.2 configuration screen

Table 5-7 Parameters on the TPM 1.2 configuration screen

Parameter

Description

Default Value

TPM State

Indicates whether to enable the TPM. The options are as follows:

  • Enabled
  • Disabled

Enabled

Pending Operation

Controls the TPM permission level. The options are as follows:

  • None
  • TPM Clear

None

Device Select

Security device type. The options are as follows:

  • Auto: TPM 1.2, TPM 2.0, and TCM security devices can be selected based on board configurations.
  • TPM1.2: Only the TPM 1.2 security device is supported.
  • TPM2.0: Only the TPM 2.0 security device is supported.

Auto

Install the TPM 2.0 security device. Table 5-8 describes the parameters on the TPM 2.0 configuration screens. Figure 5-9 show the screens.

Figure 5-9 TPM2.0 configuration screen

Table 5-8 Parameters on the TPM 2.0 configuration screen

Parameter

Description

Default Value

SHA-1 PCR Bank

Indicates whether to enable SHA-1 PCR Bank. The options are as follows:

  • Enabled
  • Disabled

Enabled

SHA256 PCR Bank

Indicates whether to enable SHA256 PCR Bank. The options are as follows:

  • Enabled
  • Disabled

Disabled

SM3_256 PCR Bank

Indicates whether to enable SM3_256 PCR Bank. The options are as follows:

  • Enabled
  • Disabled

Disabled

Pending Operation

Controls the TPM permission level. The options are as follows:

  • None
  • TPM Clear

None

Platform Hierarchy

Indicates whether to enable the platform hierarchy. The options are as follows:

  • Enabled
  • Disabled

Enabled

Storage Hierarchy

Indicates whether to enable the storage hierarchy. The options are as follows:

  • Enabled
  • Disabled

Enabled

Endorsement Hierarchy

Indicates whether to enable the endorsement hierarchy. The options are as follows:

  • Enabled:
  • Disabled

Enabled

TPM2.0 UEFI Specversion

Indicates whether to enable TPM2.0 UEFI Specversion.

TCG_2

TPM 2.0 Interface Type

TPM 2.0 interface type. The options are as follows:

  • TIS
  • CRB

TIS

Device Select

Security device type. The options are as follows:

  • Auto: TPM 1.2, TPM 2.0, and TCM security devices can be selected based on board configurations.
  • TPM1.2: Only the TPM 1.2 security device is supported.
  • TPM2.0: Only the TPM 2.0 security device is supported.

Auto

Install the TCM security device. Table 5-9 describes the parameters.Figure 5-10 shows the TCM configuration screen.

Figure 5-10 TCM configuration screen

Table 5-9 Parameters on the TCM configuration screen

Parameter

Description

Default Value

TCM State

Indicates whether to enable the TCM. The options are as follows:

  • Enabled
  • Disabled

Disabled

Pending Operation

Controls the TCM permission level. The options are as follows:

  • None
  • TCM Clear

None

Translation
Download
Updated: 2018-12-03

Document ID: EDOC1000039573

Views: 80790

Downloads: 933

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next