No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Huawei Server Brickland Platform BIOS Parameter Reference 24

This document describes the basic input/output system (BIOS) menu structure, parameters and common tasks based on the Brickland platform.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


This topic describes how to save basic input/output system (BIOS) parameter modification and exit BIOS on the Save&Exit screen.

On the Save&Exit screen, you can save BIOS parameter modification and exit BIOS. Table 4-49 describes parameters on the screen.Figure 4-45 shows the Save&Exit screen.

Figure 4-45 Save&Exit screen

Table 4-49 Parameter on the Save&Exit screen



Default Value

Save Changes and Exit

Save the modification and exit.


Discard Changes and Exit

Discard the modification and exit.


Save Changes and Reset

Save the modification and restart.


Discard Changes and Reset

Discard the modification and restart.


Save Changes

Save the modification.


Discard Changes

Discard the modification.


Restore Defaults

Load default settings again.


Boot Override

Boot from the following boot devices.


Updated: 2019-11-12

Document ID: EDOC1000039573

Views: 112190

Downloads: 953

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next