No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei Server Brickland Platform BIOS Parameter Reference 23

This document describes the basic input/output system (BIOS) menu structure, parameters and common tasks based on the Brickland platform.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling Machine Check Architecture (MCA) recovery-IO

Enabling Machine Check Architecture (MCA) recovery-IO

This topic describes how to enable the Machine Check Architecture (MCA) recovery–IO function.

Scenarios

Enable the Machine Check Architecture (MCA) recovery-IO function using basic input/output system (BIOS) programs.

The Machine Check Architecture (MCA) recovery-IO function is used for integrating Input Output (IO) error reports to the MCA architecture. After the function is enabled, the system centrally processes IO device errors. This function is disabled by default.

Impact on the System

This operation has no adverse impact on the system.

Prerequisites

Conditions

You have accessed BIOS. For details, see 2.1 .

Data

Data preparation is not required for this operation.

Procedure

  1. Choose IntelRCSetup > Runtime Error Logging and press Enter.

    The Runtime Error Logging screen appears, as shown in Figure 3-19.

    Figure 3-19 Runtime Error Logging screen

  2. Select System Errors and press Enter, as shown in Figure 3-19.
  3. Select Enable from the shortcut menu.
  4. Select Enable IOMCA on IIO and press Enter, as shown in Figure 3-20.

    Figure 3-20 Enable IOMCA on IIO

  5. Choose Enable from the shortcut menu to enable Enable IOMCA on IIO.
  6. Enable EMCA Logging Support using the same method of enabling Enable IOMCA on IIO.
  7. Press F10.

    The Exit Saving changes? dialog box appears.

  8. Select Yes to save the settings.
Translation
Download
Updated: 2018-12-03

Document ID: EDOC1000039573

Views: 81713

Downloads: 933

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next