No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei Server Brickland Platform BIOS Parameter Reference 24

This document describes the basic input/output system (BIOS) menu structure, parameters and common tasks based on the Brickland platform.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the First Boot Device

Setting the First Boot Device

Scenarios

On the BIOS, set the first boot device for the server.

Impact on the System

This operation has no adverse impact on the system.

Prerequisites

Conditions

You have accessed the BIOS Setup Utility. For details, see 2.1 .

Data

No data preparation is required for this operation.

Procedure

  1. Choose Boot.

    The Boot screen is displayed, as shown in Figure 2-20.

    Figure 2-20 Boot screen

  2. Set the first boot device.

    The Hard Disk Drive BBS Priorities, CDROM/DVD Drive BBS Priorities, BEV Device BBS Priorities, and Other Drive BBS Priorities screens does not display the components that do not support UEFI boot.

    • To set a hard drive, RAID array, SATADOM as the first boot device:
      1. On the Boot screen shown in Figure 2-20, select Hard Disk Drive BBS Priorities and press Enter.

        The Hard Disk Drive BBS Priorities screen is displayed, as shown in Figure 2-21.

        Figure 2-21 Hard Disk Drive BBS Priorities screen
      2. Select Boot Option #1 and press Enter.

        The Boot Option #1 screen is displayed.

      3. Select the device (common hard drive, RAID, or SATADOM) and press Enter.
        • In legacy mode, if the server is configured with a RAID controller card or physical hard drive that boots in legacy mode, information about the RAID controller card or physical hard drive will be displayed under Hard Disk Drive. You can set the boot device by adjusting its sequence.
        • In UEFI mode:

          If no OS is installed on the hard disks of the server, there is no boot device under Hard Disk Drive. The hard disk selected to install the OS during the OS installation will be the boot disk.

          If an OS has been installed on the server hard disk, the OS version will be displayed under Hard Disk Drive. You can set the boot device by adjusting the OS sequence.

    • To set a DVD device as the first boot device:
      1. On the Boot screen shown in Figure 2-20, select CDROM/DVD Drive BBS Priorities and press Enter.

        The CDROM/DVD Drive BBS Priorities screen is displayed.

      2. Select Boot Option #1 and press Enter.

        The Boot Option #1 screen is displayed.

      3. Select the DVD drive and press Enter.
    • To set a NIC device as the first boot device:
      1. On the Boot screen shown in Figure 2-20, select BEV Device BBS Priorities and press Enter.

        The BEV Device BBS Priorities screen is displayed.

      2. Select Boot Option #1 and press Enter.

        The Boot Option #1 screen is displayed, as shown in Figure 2-22.

        Figure 2-22 Boot Option #1 screen
      3. Select the NIC and press Enter.
    • To set an SD card or USB device as the first boot device:
      1. On the Boot screen shown in Figure 2-20, select Other Drive BBS Priorities and press Enter.

        The Other Drive BBS Priorities screen is displayed.

      2. Select Boot Option #1 and press Enter.

        The Boot Option #1 device is displayed.

      3. Select the SD card or USB device and press Enter.

  3. Press F10.

    The system displays the message "Save configuration and exit?"

  4. Select Yes and press Enter.
Translation
Download
Updated: 2019-11-12

Document ID: EDOC1000039573

Views: 115619

Downloads: 958

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next