No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Huawei Server Brickland Platform BIOS Parameter Reference 24

This document describes the basic input/output system (BIOS) menu structure, parameters and common tasks based on the Brickland platform.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting Serial Port Redirection

Setting Serial Port Redirection


Enable or disable serial port redirection on the BIOS.


  1. Access the BIOS Setup Utility. For details, see Accessing the BIOS.
  2. Choose Advanced > Console Redirection, and press Enter.

    The Console Redirection screen is displayed, as shown in Figure 2-24.
    Figure 2-24 Console Redirection screen

  3. Select Console Serial Redirection and press Enter.
  4. In the dialog box displayed, select Enabled or Disabled, and press Enter.

    • To enable serial port redirection, select Enabled.
    • To disable serial port redirection, select Disabled.

  5. Press F10.

    The system displays the message "Save configuration and exit?"

  6. Select Yes and press Enter.

Updated: 2019-11-12

Document ID: EDOC1000039573

Views: 112770

Downloads: 953

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next