No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei Server Brickland Platform BIOS Parameter Reference 23

This document describes the basic input/output system (BIOS) menu structure, parameters and common tasks based on the Brickland platform.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling or Disabling Memory Thermal Throttling

Enabling or Disabling Memory Thermal Throttling

This topic describes how to enable or disable the Memory Thermal Throttling function.

Scenarios

Enable or disable the Memory Thermal Throttling function using basic input/output system (BIOS) programs.

The Memory Thermal Throttling function is used for adjusting memory temperature. If memory temperature is excessively high after the function is enabled, the memory access rate is reduced and Baseboard Management Controller (BMC) adjusts the fan to cool down the memory, to avoid DIMM damage due to overheat. This function is enabled by default.

Impact on the System

This operation has no adverse impact on the system.

Prerequisites

Conditions

You have accessed BIOS. For details, see 2.1 .

Data

Data preparation is not required for this operation.

Procedure

  1. Choose IntelRCSetup > Memory RAS Configuration and press Enter.

    The Memory RAS Configuration screen appears, as shown in Figure 3-2.

    Figure 3-2 Memory RAS Configuration screen

  2. Select Memory Thermal Throttling and press Enter, as shown in Figure 3-2.
  3. From the short-cut menu that appears, choose Enable to enable Memory Thermal Throttling or choose Disable to disable Memory Thermal Throttling.
  4. Press F10.

    The Exit Saving changes? dialog box appears.

  5. Select Yes to save the settings.
Translation
Download
Updated: 2018-12-03

Document ID: EDOC1000039573

Views: 73628

Downloads: 925

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next