No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei Server Brickland Platform BIOS Parameter Reference 23

This document describes the basic input/output system (BIOS) menu structure, parameters and common tasks based on the Brickland platform.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
PCH Configuration

PCH Configuration

This topic describes how to configure a platform controller hub (PCH) on the PCH Configuration screen.

On the PCH Configuration screen, you can configure PCH, including the PCH device, hard disk port, USB port, and PCIE root port. Table 5-30 describes parameters on the screen.Figure 5-33 shows the PCH Configuration screen.

Figure 5-33 PCH Configuration screen

Table 5-30 Parameters on the PCH Configuration screen

Parameter

Description

Default Value

PCH Information

PCH information.

-

PCH Devices

PCH device configuration menu.

-

PCH SATA Configuration

PCH SATA configuration menu.

-

Table 5-31 describes parameters on the PCH Information screen.Figure 5-34 shows the PCH Information screen.

Figure 5-34 PCH Information screen

Table 5-31 Parameters on the PCH Information screen

Parameter

Description

Default Value

Platform Type

Platform type.

ThunderRidge

PCH SKU

PCH architecture.

Patsburg

PCH Stepping

PCH model.

C1 stepping

PCH Type

PCH type information.

PCH -J

Table 5-32 describes parameters on the PCH Devices screen.Figure 5-35 shows the screen.

Figure 5-35 PCH Devices screen

Table 5-32 Parameters on the PCH Devices screen

Parameter

Description

Default Value

USB Configuration

USB configuration menu.

-

Table 5-33 describes parameters on the USB Configuration screen.Figure 5-36 shows the screen.

Figure 5-36 USB Configuration screen

Table 5-33 Parameters on the USB Configuration screen

Parameter

Description

Default Value

USB Ports Control

Indicates whether to enable the independent control of USB ports. The options are as follows:

  • Enable: enable.
  • Disable: disable.

If this parameter is set to Disable, all USB ports are enabled by default, and no port can be enabled or disabled independently.

Enable

USB Port #0–#13

Indicates whether to enable USB ports 0 to 13. The options are as follows:

  • Enable: enable.
  • Disable: disable.

If USB Ports Control is set to Disable, this parameter is not displayed.

Enable

Table 5-34 USB ports on the RH8100 V3 server

Port

Function

Port

Function

Port 0

USB port on the front panel

Port 7

Reserved

Port 1

USB port on the front panel

Port 8

Connected to a virtual mouse

Port 2

Reserved

Port 9

Connected to a USB flash drive

Port 3

External USB port on the high-performance fusion console

Port 10

Connected to a virtual DVD-ROM drive

Port 4

External USB port on the high-performance fusion console

Port 11

Reserved

Port 5

Connected to a virtual keyboard

Port 12

Reserved

Port 6

Connected to an SD card

Port 13

Reserved

Table 5-35 USB ports on the CH242 V3 server

Port

Function

Port

Function

Port0

Connected to a virtual DVD-ROM drive

Port7

Reserved

Port1

Connected to a virtual floppy disk drive

Port8

Connected to a built-in USB flash drive

Port2

External USB port provided by a high-density cable

Port9

Connected to an SD card

Port3

External USB port provided by a high-density cable

Port10

Connected to an SD card

Port4

External USB port provided by a high-density cable

Port11

Reserved

Port5

Connected to a virtual mouse

Port12

Reserved

Port6

Reserved

Port13

Reserved

Table 5-36 USB ports on the CH242 V3 DDR4 server

Port

Function

Port

Function

Port0

Connected to a virtual keyboard and mouse

Port7

Reserved

Port1

Connected to a virtual floppy disk drive

Port8

Connected to a built-in USB flash drive

Port2

External USB port provided by a high-density cable

Port9

Connected to an SD card

Port3

External USB port provided by a high-density cable

Port10

Reserved

Port4

External USB port provided by a high-density cable

Port11

Reserved

Port5

Connected to a virtual DVD-ROM drive

Port12

Reserved

Port6

Reserved

Port13

Reserved

Table 5-37 USB ports on the RH5885 V3 server

Port

Function

Port

Function

Port0

USB port on the rear panel

Port7

Connected to a virtual keyboard and mouse

Port1

USB port on the rear panel

Port8

Connected to a USB flash drive

Port2

USB port on the front panel

Port9

Reserved

Port3

USB port on the front panel

Port10

Reserved

Port4

Reserved

Port11

Reserved

Port5

Connected to a virtual DVD-ROM drive

Port12

Reserved

Port6

Connected to a virtual floppy disk drive

Port13

Reserved

Table 5-38 USB ports on the RH5885H V3 server

Port

Function

Port

Function

Port0

USB port on the rear panel

Port7

Connected to a virtual keyboard and mouse

Port1

USB port on the rear panel

Port8

Connected to an SD card

Port2

USB port on the front panel

Port9

Connected to a USB flash drive

Port3

USB port on the front panel

Port10

Connected to an SD card

Port4

Reserved

Port11

Connected to a USB flash drive

Port5

Connected to a virtual DVD-ROM drive

Port12

Reserved

Port6

Connected to a virtual floppy disk drive

Port13

Reserved

Table 5-39 describes parameters on the PCH SATA Configuration screen.Figure 5-37 shows the screen.

Figure 5-37 PCH SATA Configuration screen

Table 5-39 Parameters on the PCH SATA Configuration screen

Parameter

Description

Default Value

SATA Controller

Indicates whether to enable the SATA controller. The options are as follows:

  • Enable: enable.
  • Disable: disable.

Enable

Configure SATA as

SATA controller configuration menu. The options are as follows:

  • IDE
  • AHCI
  • RAID

AHCI

SATA Port 0

Name of SATA port 0 device. If the device is not detected, the value of this parameter is Not Installed.

The configurations of SATA Port 1, SATA Port 2, SATA Port 3, SATA Port 4, and SATA Port 5 are the same as the configuration of SATA Port 0.

-

Translation
Download
Updated: 2018-12-03

Document ID: EDOC1000039573

Views: 72286

Downloads: 923

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next