No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei Server Brickland Platform BIOS Parameter Reference 23

This document describes the basic input/output system (BIOS) menu structure, parameters and common tasks based on the Brickland platform.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling Live Error Recovery

Enabling Live Error Recovery

This topic describes how to enable the Live Error Recovery function.

Scenarios

Enable the Live Error Recovery function by using the basic input/output system (BIOS).

The Live Error Recovery function is used for rectifying peripheral component interconnect express (PCIe) errors dynamically. For operating systems and device drivers, link disconnection (Surprise link down) means that devices are removed without notification. The Live Error Recovery function requires support from operating systems and device drivers. No operating system for commercial use supports this function. This function enables PCIe devices to have self-repair capabilities. This function is disabled by default.

Impact on the System

This operation has no adverse impact on the system.

Prerequisites

Conditions

You have accessed BIOS. For details, see 2.1 .

Data

Data preparation is not required for this operation.

Procedure

  1. Choose IntelRCSetup > Runtime Error Logging and press Enter.

    The Runtime Error Logging screen appears, as shown in Figure 3-17.

    Figure 3-17 Runtime Error Logging screen

  2. Select System Errors and press Enter, as shown in Figure 3-17.
  3. Choose Enable from the shortcut menu.
  4. Select PCI/PCIE Error Enabling and press Enter.

    The PCI/PCIE Error Enabling screen appears, as shown in Figure 3-18.

    Figure 3-18 PCI/PCIE Error Enabling screen

  5. Select Live Error Recovery and press Enter, as shown in Figure 3-18.
  6. Choose Enable from the shortcut menu to enable Live Error Recovery.
  7. Press F10.

    The Exit Saving changes? dialog box appears.

  8. Select Yes to save the settings.
Translation
Download
Updated: 2018-12-03

Document ID: EDOC1000039573

Views: 97129

Downloads: 940

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next