No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


RH5885 V3 Server V100R003 User Guide 30

This document describes the appearance, specifications, parameters, and structure of the RH5885 V3, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying Cable Connections

Verifying Cable Connections

Before verifying cable connections, check that the power is cut off. Otherwise, any incorrect connection or loose connection may cause personal injury or device damage.

Table 3-3 lists the cable connection check items.

Table 3-3 Cable connection checklist

Check Item


Power cables

Power cables are correctly connected to the rear of the chassis.

Network cables

Network cables are correctly connected to the fast Ethernet (FE) management ports or gigabit Ethernet (GE) service ports at the rear of the chassis.

Ground cable


The server provides no grounding port. It is grounded through the cabinet. Ensure that the cabinet is properly grounded.

Updated: 2018-10-24

Document ID: EDOC1000040297

Views: 82612

Downloads: 1543

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next