No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

RH5885 V3 Server V100R003 User Guide 32

This document describes the appearance, specifications, parameters, and structure of the RH5885 V3, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing the Air Duct

Installing the Air Duct

  1. Remove the chassis cover of the RH5885 V3. For details, see Removing the Chassis Cover.
  2. Wear an ESD wrist strap or ESD gloves. For details, see Safety Instructions.
  3. Take the spare air duct out of the ESD bag.
  4. Align the positioning pins on the air duct with the fixing holes on the mainboard by following the instructions on the chassis, and vertically place the air duct downwards. See Figure 5-94.

    Figure 5-94 Installing the air duct

Translation
Download
Updated: 2019-10-21

Document ID: EDOC1000040297

Views: 105857

Downloads: 1582

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next