No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

RH5885 V3 Server V100R003 User Guide 32

This document describes the appearance, specifications, parameters, and structure of the RH5885 V3, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Initial Configuration Process

Initial Configuration Process

Figure 7-12 shows the initial configuration process of a server.

Figure 7-12 Initial configuration process

Table 7-6 describes the Initial configuration process.

Table 7-6 Initial configuration process

Step

Description

Check the server.

  • Check the indicators on the server.
  • Check the server status on the iBMC WebUI.
    • Check server software versions.
    • Check for and clear server alarms.

Logging in to the Remote Desktop

Log in to the iBMC WebUI, and then log in to the server using the Remote Control page.

Configure RAID.

The RH5885 V3 supports the LSISAS2208, LSISAS2308, LSISAS3008, and LSISAS3108 controller cards. Create RAID arrays based on site requirements.

Configure the basic input/output system (BIOS).

Configure the server BIOS, including setting the server boot priority and BIOS password, selecting BEV as the first boot option, and enabling the Preboot Execution Environment (PXE) function for a network interface card (NIC).

Change the default iBMC password.

Change the default password for iBMC.

Install an operating system (OS).

Install an OS for the server.

Translation
Download
Updated: 2019-10-21

Document ID: EDOC1000040297

Views: 106149

Downloads: 1582

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next