No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


RH5885 V3 Server V100R003 User Guide 32

This document describes the appearance, specifications, parameters, and structure of the RH5885 V3, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Removing the PSU Backplane

Removing the PSU Backplane

  1. Power off the server. For details, see Powering On and Off the RH5885 V3. Remove all power cables.
  2. Remove all PSUs from the RH5885 V3. For details, see Removing a PSU.
  3. Remove the mainboard from the RH5885 V3. For details, see Removing the Mainboard.
  4. Wear an ESD wrist strap or ESD gloves. For details, see Safety Instructions.
  5. Remove all cables from the PSU backplane.
  6. Unscrew the PSU backplane. See step (1) in Figure 5-109.

    Figure 5-109 Removing the PSU backplane

  7. Push the PSU backplane in the arrow direction to remove it. See step (2) in Figure 5-109.
  8. Place the removed PSU backplane in an ESD bag.
Updated: 2019-10-21

Document ID: EDOC1000040297

Views: 105591

Downloads: 1578

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next