No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

RH5885 V3 Server V100R003 User Guide 32

This document describes the appearance, specifications, parameters, and structure of the RH5885 V3, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing a DIMM

Installing a DIMM

The following describe the rules for installing DIMMs:

  • The RH5885 V3 provides 48 slots for installing double data rate 3 (DDR3) DIMMs. Each CPU integrates 16 memory channels: 1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D, 3A, 3B, 3C, 3D, 4A, 4B, 4C, and 4D. Table 5-7 lists the composition of each memory channel.
Table 5-7 Composition of each memory channel

Memory Channel

Composition

1A

J110 DIMM000 (1A1)

J111 DIMM001 (1A2)

J112 DIMM002 (1A3)

1B

J113 DIMM010 (1B1)

J114 DIMM011 (1B2)

J115 DIMM012 (1B3)

1C

J116 DIMM020 (1C1)

J117 DIMM021 (1C2)

J118 DIMM022 (1C3)

1D

J119 DIMM030 (1D1)

J120 DIMM031 (1D2)

J121 DIMM032 (1D3)

2A

J122 DIMM200 (2A1)

J123 DIMM201 (2A2)

J124 DIMM202 (2A3)

2B

J125 DIMM210 (2B1)

J126 DIMM211 (2B2)

J127 DIMM212 (2B3)

2C

J128 DIMM220 (2C1)

J129 DIMM221 (2C2)

J130 DIMM222 (2C3)

2D

J131 DIMM230 (2D1)

J132 DIMM231 (2D2)

J133 DIMM232 (2D3)

3A

J134 DIMM400 (3A1)

J135 DIMM401 (3A2)

J136 DIMM402 (3A3)

3B

J137 DIMM410 (3B1)

J138 DIMM411 (3B2)

J139 DIMM412 (3B3)

3C

J140 DIMM420 (3C1)

J141 DIMM421 (3C2)

J142 DIMM422 (3C3)

3D

J143 DIMM430 (3D1)

J144 DIMM431 (3D2)

J145 DIMM432 (3D3)

4A

J146 DIMM600 (4A1)

J147 DIMM601 (4A2)

J148 DIMM602 (4A3)

4B

J149 DIMM610 (4B1)

J150 DIMM611 (4B2)

J151 DIMM612 (4B3)

4C

J152 DIMM620 (4C1)

J153 DIMM621 (4C2)

J154 DIMM622 (4C3)

4D

J155 DIMM630 (4D1)

J156 DIMM631 (4D2)

J157 DIMM632 (4D3)

  • Table 5-8 describes DIMM configuration rules.
Table 5-8 DIMM configuration rules

CPU

DIMM Installation Sequence

CPU 1 and CPU 2

1A1, 2A1, 1B1, 2B1, 1C1, 2C1, 1D1, 2D1, 1A2, 2A2, 1B2, 2B2, 1C2, 2C2, 1D2, 2D2, 1A3, 2A3, 1B3, 2B3, 1C3, 2C3, 1D3, 2D3

CPU 1, CPU 2, CPU 3, and CPU 4

1A1, 2A1, 3A1, 4A1, 1B1, 2B1, 3B1, 4B1, 1C1, 2C1, 3C1, 4C1, 1D1, 2D1, 3D1, 4D1, 1A2, 2A2, 3A2, 4A2, 1B2, 2B2, 3B2, 4B2, 1C2, 2C2, 3C2, 4C2, 1D2, 2D2, 3D2, 4D2, 1A3, 2A3, 3A3, 4A3, 1B3, 2B3, 3B3, 4B3, 1C3, 2C3, 3C3, 4C3, 1D3, 2D3, 3D3, 4D3

Procedure

  1. Power off the server. For details, see Powering On and Off the RH5885 V3. Remove all power cables.
  2. Remove the chassis cover of the RH5885 V3. For details, see Removing the Chassis Cover.
  3. Remove the air duct of the RH5885 V3. For details, see Removing the Air Duct.
  4. Remove the beam that blocks the DIMM. For details, see Removing the Beam.
  5. Wear an ESD wrist strap or ESD gloves. For details, see Safety Instructions.
  6. Take the spare DIMM out of the ESD bag.
  7. Open the two fixing clips of the DIMM slot. See Figure 5-77.

    Figure 5-77 Opening the fixing clips in a DIMM slot

  8. Align the DIMM with the DIMM slot, and insert the DIMM into the slot. See Figure 5-78.

    The two fixing clips close automatically.

    Figure 5-78 Installing a DIMM

Translation
Download
Updated: 2019-10-21

Document ID: EDOC1000040297

Views: 107674

Downloads: 1582

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next