No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


RH5885 V3 Server V100R003 User Guide 32

This document describes the appearance, specifications, parameters, and structure of the RH5885 V3, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Removing the LED Diagnosis Panel

Removing the LED Diagnosis Panel

  1. Power off the server. For details, see Powering On and Off the RH5885 V3. Remove all power cables.
  2. Remove the chassis cover of the RH5885 V3. For details, see Removing the Chassis Cover.
  3. Wear an ESD wrist strap or ESD gloves. For details, see Safety Instructions.
  4. Check whether the RH5885 V3 is equipped with a front bezel?

  5. Remove the front bezel of the RH5885 V3. For details, see (Optional) Removing the Front Bezel.
  6. Remove the cable from the LED diagnosis panel. See step (1) in Figure 5-85.

    Figure 5-85 Removing the LED diagnosis panel

  7. Remove the dowel. See step (2) in Figure 5-85.
  8. Push out the LED diagnosis panel. See step (3) in Figure 5-85.
  9. Place the removed LED diagnosis panel in an ESD bag.
Updated: 2019-10-21

Document ID: EDOC1000040297

Views: 105553

Downloads: 1578

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next