No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


RH5885 V3 Server V100R003 User Guide 32

This document describes the appearance, specifications, parameters, and structure of the RH5885 V3, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing the Left Mounting Ear

Installing the Left Mounting Ear

  1. Power off the server. For details, see Powering On and Off the RH5885 V3. Remove all power cables.
  2. Wear an ESD wrist strap or ESD gloves. For details, see Safety Instructions.
  3. Take the spare indicator board out of the ESD bag.
  4. Connect the indicator board cable. See step (1) in Figure 5-98.

    Figure 5-98 Installing the left mounting ear

  5. Place the indicator board in to the left mounting ear. See step (2) in Figure 5-98.
  6. Install the left mounting ear on to the chassis and fasten the latch. See step (3) in Figure 5-98.
  7. To install a front bezel, see the operation procedure in (Optional) Installing the Front Bezel.
Updated: 2019-10-21

Document ID: EDOC1000040297

Views: 111804

Downloads: 1598

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next