No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


RH5885 V3 Server V100R003 User Guide 30

This document describes the appearance, specifications, parameters, and structure of the RH5885 V3, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Powering Off the Server

Powering Off the Server


Power off the server before you maintain, replace, or relocate it.

Impact on the System

Powering off the server interrupts the services and programs running on it.



All services and programs have been stopped or switched to other servers.


  • All data has been backed up.
  • You have determined the cabinet number and installation position for the server to be powered off.
  • You have obtained the IP address, user name, and user password for the iMana 200 management network port.


ESD wrist strap or ESD gloves: used to prevent ESD damage


For details about how to obtain the IP address for the iMana 200 management network port and how to perform operations on iMana 200, see the Huawei Server iMana 200 User Guide.


Power off the server to have it enter the standby state.

  • Use the keyboard, video, and mouse (KVM) to shut down the server operating system (OS).
  • Press and hold down the power button on the front panel until the server is powered off.

    If you use this method to power off and then on a server when a fault occurs, some information may be missing in the fdm_log file that records information collected through the one-click information collection function of the management software. Avoid using this method to power off and then on a server when a fault occurs.

  • Remotely power off the server using the iMana 200 CLI.

    Run the ipmcset -d powerstate -v 0 command on the iMana 200 CLI.

  • Remotely power off the server using the iMana 200 WebUI.

    Log in to the iMana 200 WebUI, choose PS Management > Power Control, and click Power Off and then OK.

Updated: 2018-10-24

Document ID: EDOC1000040297

Views: 82836

Downloads: 1543

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next