No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

RH5885 V3 Server V100R003 User Guide 30

This document describes the appearance, specifications, parameters, and structure of the RH5885 V3, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Removing a DIMM

Removing a DIMM

  1. Power off the server. For details, see Powering On and Off the RH5885 V3. Remove all power cables.
  2. Remove the chassis cover of the RH5885 V3. For details, see Removing the Chassis Cover.
  3. Remove the air duct of the RH5885 V3. For details, see Removing the Air Duct.
  4. Remove the beam that blocks the DIMM. For details, see Removing the Beam.
  5. Wear an ESD wrist strap or ESD gloves. For details, see Safety Instructions.
  6. Open the two fixing clips of the DIMM slot. See step (1) in Figure 5-76.

    Figure 5-76 Removing a DIMM

  7. Remove the DIMM from the slot. See step (2) in Figure 5-76.
  8. Place the removed DIMM in an ESD bag.
Translation
Download
Updated: 2018-10-24

Document ID: EDOC1000040297

Views: 82843

Downloads: 1543

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next