No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

RH5885 V3 Server V100R003 User Guide 30

This document describes the appearance, specifications, parameters, and structure of the RH5885 V3, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing the Right Mounting Ear

Installing the Right Mounting Ear

  1. Power off the server. For details, see Powering On and Off the RH5885 V3. Remove all power cables.
  2. Wear an ESD wrist strap or ESD gloves. For details, see Safety Instructions.
  3. Take the spare indicator board out of the ESD bag.
  4. Install the light pipe.

    1. Place the light pipe on the right mounting ear, and align it with the jack. See step (1) in Figure 5-105.
      Figure 5-105 Placing the light pipe on the right mounting ear

    2. Insert the hollow plastic cylinder in the arrow direction. See step (2) in Figure 5-106.
      Figure 5-106 Inserting the hollow plastic cylinder

    3. Insert the solid plastic cylinder in the arrow direction. See step (3) in Figure 5-107.
    Figure 5-107 Inserting the solid plastic cylinder

  5. Connect the indicator board cable. See step (1) in Figure 5-108.

    Figure 5-108 Installing the right mounting ear

  6. Place the indicator board in to the right mounting ear. See step (2) in Figure 5-108.
  7. Install the right mounting ear on to the chassis and fasten the latch. See step (3) in Figure 5-108.
  8. To install a front bezel, see the operation procedure in (Optional) Installing the Front Bezel.
Translation
Download
Updated: 2018-10-24

Document ID: EDOC1000040297

Views: 73744

Downloads: 1527

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next