No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

RH5885 V3 Server V100R003 User Guide 32

This document describes the appearance, specifications, parameters, and structure of the RH5885 V3, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Removing a DC PSU

Removing a DC PSU

  1. Power off the server. For details, see Powering On and Off the RH5885 V3.
  2. Wear an ESD wrist strap or ESD gloves. For details, see Safety Instructions.
  3. Insert a screwdriver into the square hole above a power cable and remove the cable from the square hole. See Figure 5-21.

    Figure 5-21 Removing power cables

  4. Repeat Removing a DC PSU to remove all the other power cables from the PSU.
  5. Hold down the release button, and hold the handle to pull out part of the PSU. See step (1) in Figure 5-22.

    Figure 5-22 Removing a PSU

  6. Release the release button, and remove the PSU from the slot. See step (2) in Figure 5-22.
  7. Place the removed PSU into an ESD bag.
Translation
Download
Updated: 2019-10-21

Document ID: EDOC1000040297

Views: 106748

Downloads: 1582

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next