No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

RH5885 V3 Server V100R003 User Guide 30

This document describes the appearance, specifications, parameters, and structure of the RH5885 V3, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Changing the iBMC User Password

Changing the iBMC User Password

Scenarios

Change an iBMC user password for the server.

Prerequisites

Conditions

You have logged in to the iBMC WebUI over a network port. For details, see Logging In to the iBMC WebUI.

Data

Table 7-7 lists the default user name and password of the iBMC.

Table 7-7 Default user name and password

Default User Name and Password

Description

  • User name: root
  • Password: Huawei12#$

The default user of the iBMC belongs to the administrator group and has full rights to access all iBMC resources and perform all operations.

Procedure

  1. On the iBMC WebUI, choose Config on the menu bar, choose User Settings in the navigation tree, and click the Local User tab in the right pane.

    The Local User page is displayed, as shown in Figure 7-20.

    NOTE:

    After you select Enable for Password Complexity Cheek, the system performs the password complexity check when a new password is set.

    Figure 7-20 Local User page

  2. Locate the user whose password needs to be changed, and click.

    The page for changing the user password is displayed, as shown in Figure 7-21.

    Figure 7-21 Changing a user password

  3. Change the user password by following on-screen instructions, click save.
Translation
Download
Updated: 2018-10-24

Document ID: EDOC1000040297

Views: 73072

Downloads: 1525

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next