No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

RH5885 V3 Server V100R003 User Guide 32

This document describes the appearance, specifications, parameters, and structure of the RH5885 V3, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing a SATA HDD, SAS HDD, or SSD

Installing a SATA HDD, SAS HDD, or SSD

You do not need to power off the RH5885 V3 before installing a hard disk.

Procedure

  1. Wear an ESD wrist strap or ESD gloves. For details, see Safety Instructions.
  2. Take the spare hard disk out of the ESD bag.
  3. Fully open the ejector lever and push the hard disk into the chassis along the guide rails until it does not move. See step (1) in Figure 5-8.

    Figure 5-8 Installing a hard disk

  4. Ensure that the ejector lever is fastened to the beam, and lower the ejector lever to completely insert the hard disk into the chassis. See step (2) in Figure 5-8.
  5. To install a front bezel, see the operation procedure in (Optional) Installing the Front Bezel.
Translation
Download
Updated: 2019-10-21

Document ID: EDOC1000040297

Views: 112137

Downloads: 1598

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next