No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


RH5885 V3 Server V100R003 User Guide 30

This document describes the appearance, specifications, parameters, and structure of the RH5885 V3, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Removing a Server and Adjustable Guide Rail

Removing a Server and Adjustable Guide Rail

  1. Wear an ESD wrist strap or ESD gloves. For details, see Safety Instructions.
  2. Power off the server. For details, see Powering On and Off the RH5885 V3.
  3. Disconnect all power cables and signal cables from the server.


    Remove power cables first to prevent damage or injury caused by static electricity.

  4. Remove the server.

    1. Loosen the captive screws on the server panel using a screwdriver. See (1) in Figure 4-3.
      Figure 4-3 Removing the server

    2. Pull out the server along the guide rails away from the cabinet. See (2) in Figure 4-3.
    3. Place the removed server on an ESD platform.

  5. Loosen the four screws on the guide rail. See (1) in Figure 4-4.
  6. Shorten the guide rail and take it out. See (2) in Figure 4-4.

    Figure 4-4 Removing an adjustable guide rail

  7. Remove the other guide rail on the opposite side in the same way.
Updated: 2018-10-24

Document ID: EDOC1000040297

Views: 83862

Downloads: 1545

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next