No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

RH5885 V3 Server V100R003 User Guide 30

This document describes the appearance, specifications, parameters, and structure of the RH5885 V3, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Removing a Fan Module

Removing a Fan Module

  1. Wear an ESD wrist strap or ESD gloves. For details, see Safety Instructions.
  2. Check whether the RH5885 V3 is equipped with a front bezel?

  3. Remove the front bezel of the RH5885 V3. For details, see (Optional) Removing the Front Bezel.
  4. Push the release button that fastens the fan module handle. See step (1) in Figure 5-30.

    Figure 5-30 Removing a fan module

  5. Open the handle for the fan module. See step (2) in Figure 5-30.
  6. Hold the handle to pull out the fan module horizontally from the chassis. See step (3) in Figure 5-30.
  7. An ESD bag holds only one fan module.

    Place the removed fan module into an ESD bag.

Translation
Download
Updated: 2018-10-24

Document ID: EDOC1000040297

Views: 75335

Downloads: 1527

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next