No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

RH5885 V3 Server V100R003 User Guide 30

This document describes the appearance, specifications, parameters, and structure of the RH5885 V3, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the BIOS

Configuring the BIOS

Scenarios

Configure the BIOS for the RH5885 V3 in remote control mode.

The configuration items are as follows:

  • Server boot mode
  • Network drive
  • Preboot Execute Environment (PXE) on the network interface card (NIC)
NOTE:

Prerequisites

Conditions

  • The RH5885 V3 is powered on.
  • You have logged in to the iMana WebUI

Data

None

Workflow

Figure 7-17 shows the process for configuring the BIOS.

Figure 7-17 Process for configuring the BIOS

Procedure

  1. Restart the server.

    1. Click on the menu bar that is in the real-time server desktop.
    2. Select Graceful Reboot.

      The system displays "Are you sure to perform this operation?"

    3. Click Yes.

      The server restarts.

    4. When the basic input/output system (BIOS) startup screen appears, press Del to access the BIOS Setup Utility screen.
      NOTE:

      The server restart duration varies according to the configurations. For example, if a server is fully configured with forty-eight 8 GB DIMMs without any RAID controller card, the server takes 8 minutes to restart.

    5. Enter a password as prompted.
      NOTE:
      • The default BIOS password is Huawei12#$ for the American keyboard, Huqzei&é34 for the French keyboard, and Huawei12£$ for the English keyboard.
      • If an incorrect BIOS password is entered for three consecutive times, the BIOS is locked. You can press Ctrl+Alt+Del to unlock the BIOS.

  2. Set the server boot priority.

    Choose Boot.

    The Boot screen appears, as shown in Figure 7-18.

    NOTE:

    Boot options are displayed under FIXED BOOT ORDER Priorities based on the preset priority. The default boot sequence is HDD > CDROM > BEV > OTHERS.

    Figure 7-18 Boot screen

  3. Select the boot options to be configured.

    Press + or - to change the boot sequence. Select BEV and press + to the Boot Option #1 to set the first boot option.

    The display order of the boot options indicates the boot order.

    • Press + to select the previous boot option.
    • Press - to select the next boot option.

  4. Configure the PXE.

    1. Select the Boot tab.

      The Boot scree is displayed, as shown in Figure 7-18.

    2. Select PXE1 Configuration, or PXE2 Configuration and press Enter.
    3. Choose Enable from the shortcut menu and press Enter to enable the PXE function for the specified network port.

  5. Set the BIOS password.

    1. Select the Security tab.

      The Security screen is displayed, as shown in Figure 7-19.

      Figure 7-19 Security screen

    2. Select Administrator Password and press Enter. Set an administrator password.
      NOTE:
      • The administrator password must be a string of 8 to 16 characters, and must contain special characters (including spaces), uppercase letters, lowercase letters, and digits.
      • The default BIOS password is Huawei12#$ for the American keyboard, Huqzei&é34 for the French keyboard, and Huawei12£$ for the English keyboard.
    3. (Optional) After the setting, select Clear Administrator Password to clear the password.
    4. Press F10.

      The Save configuration and exit? dialog box appears.

    5. Select Yes and press Enter to save the setting.

Translation
Download
Updated: 2018-10-24

Document ID: EDOC1000040297

Views: 73686

Downloads: 1527

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next