No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

RH5885 V3 Server V100R003 User Guide 30

This document describes the appearance, specifications, parameters, and structure of the RH5885 V3, and how to install an OS, replace parts, and install, remove, configure, and troubleshoot the server.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Removing the Right Mounting Ear

Removing the Right Mounting Ear

  1. Power off the server. For details, see Powering On and Off the RH5885 V3. Remove all power cables.
  2. Wear an ESD wrist strap or ESD gloves. For details, see Safety Instructions.
  3. Check whether the RH5885 V3 is equipped with a front bezel?

  4. Remove the front bezel of the RH5885 V3. For details, see (Optional) Removing the Front Bezel.
  5. Use a flat-head screwdriver to lever the latch upwards. See step (1) in Figure 5-99.

    Figure 5-99 Removing the right mounting ear

  6. Remove the upper part of the right mounting ear. See step (2) in Figure 5-99.
  7. Use a flat-head screwdriver to lever the latch upwards. See step (3) in Figure 5-99.
  8. Remove the right mounting ear. See step (4) in Figure 5-99.
  9. Remove the indicator board and cables on the right mounting ear.
  10. Remove the light pipe.

    1. Push the solid plastic cylinder in the arrow direction. See step (1) in Figure 5-100.
      Figure 5-100 Pushing the solid plastic cylinder

    2. Remove the solid plastic cylinder in the arrow direction. See step (2) in Figure 5-101.
      Figure 5-101 Removing the solid plastic cylinder

    3. Press the middle of the hollow plastic cylinder and push it in the arrow direction. See step (3) in Figure 5-102.
      Figure 5-102 Pushing the hollow plastic cylinder

    4. Remove the hollow plastic cylinder in the arrow direction. See step (4) in Figure 5-103.
      Figure 5-103 Removing the hollow plastic cylinder

    5. Remove the light pipe in the arrow direction. See step (5) in Figure 5-104.
    Figure 5-104 Removing the light pipe

  11. Place the removed indicator board in an ESD bag.
Translation
Download
Updated: 2018-10-24

Document ID: EDOC1000040297

Views: 73173

Downloads: 1527

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next