No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Huawei Server Maintenance Manual 09

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
What Do I Do If PXE Boot Fails?

What Do I Do If PXE Boot Fails?


What do I do if PXE boot fails?


By default, only the LOM NIC of the primary BPU supports PXE on a KunLun server. If you want to boot from the LOM NIC of the standby BPU, enable Boot-Network in the BIOS and ensure that the network port in Boot-UEFI NETWORK Drive BBS Priorities-Boot Option #1 is correctly connected to the PXE server.

Updated: 2019-02-25

Document ID: EDOC1000041338

Views: 71457

Downloads: 3786

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next